12 Scaffolding Safety Tips and Hints

We picked the brain of a scaffolding expert, and he gave us these great tips on how to work smart and stay safe on and around scaffolds. So, whether you’re changing sky-high warehouse light bulbs or replacing windows on a two-story home, here's how to safely use scaffolds to get things done off the ground.

Scaffolding stacked in the bed of a truck | Construction Pro Tips
Construction Pro Tips

1 / 12

Haul scaffolding safely

Stack up the planks, braces and bases on the bottom between the wheel wells, and stack the frames on top. Avoid propping the scaffolding frames up on the side of the bed. It's best to have everything as low as possible so parts don't get blown or bounced out. And frames that stick out past the side of the bed can be a conk hazard for someone walking by the truck. If you have a shorter bed, you may have to keep the tailgate open; just make sure to secure it all with a tie-down strap.

Stacking scaffold planks on the top of a scaffold | Construction Pro Tips
Family Handyman

2 / 12

Plank the whole bay

Whenever possible, cover the whole width of the scaffold with planks. This creates a larger work area and reduces the risk of a fall. When it isn't possible, especially when you're working midway up ladder frames like these, install another plank higher up to create a sort of guardrail. When you work on casters, install a diagonal “gooser” brace. It will keep the scaffold square and stable.

Setting up the scaffolding cross-braces | Construction Pro Tips
Family Handyman

3 / 12

How to set up scaffolding safely

Install the base jacks or casters first so you don't have to lift the entire scaffold to slide them in. Install both cross braces on one frame. It will stay upright with the support of the cross braces (top). Move the second frame into position and attach the cross braces to that (bottom). Slide the scaffold about 14 in. from the wall before installing the planks.

Putting a scaffold guard rail in place | Construction Pro Tips
Family Handyman

4 / 12

Install a guardrail

Installing a guardrail is the best way to prevent accidentally stepping off the edge of the platform. Safety harnesses aren't necessary when you're working on this type of scaffold. In fact, if you fall while wearing a safety harness, you could pull the whole platform down with you, endangering everyone working in the area.

A diagram showing the three-point grip technique | Construction Pro Tips
Family Handyman

5 / 12

Maintain a three-point grip

When you're climbing a scaffold, always maintain a three-point grip. That means that one hand and two feet, or one foot and two hands, should stay in contact with the scaffold at all times. Keep your body as close to the frame as possible. Leaning way out could cause the whole works to tip over right on top of you. And never climb on the cross braces; they're not designed to handle the weight.

Building scaffolding on a stable base | Construction Pro Tips
Family Handyman

6 / 12

Setting up scaffolding on uneven ground

Scaffold frames are designed for use with either casters or base plates. If you skip them, the frame tubes can get damaged and structurally weakened. Set a 2x10 block of wood under each leg, even when using a base plate. This will help prevent sinking into soft soils or hot asphalt.

A toe board in place to prevent objects from falling off scaffolding | Construction Pro Tips
Family Handyman

7 / 12

Working on scaffolding:

Safety first: Keep the planks clear of clutter to reduce the risk of tripping or kicking stuff onto unsuspecting souls working below. Keep your tools and supplies in buckets, caddies and toolboxes whenever possible. Install a 2x4 toe board to prevent items from falling. Hold it in place at the corners with wire. It's tempting to hang tools from the railings, but don't do it. Adding weight to the railings increases the odds that they could fail if someone leans against them. Hard hats for ground workers are always a good idea.

Accessing the scaffolding with a ladder on the wall | Construction Pro Tips
Family Handyman

8 / 12

Access the platform with a ladder

Use a ladder to safely and easily access a scaffold, especially when you're working with wood planks hanging over the ends. Run the ladder at least 3 ft. past the surface of the planks. Lean the ladder on the wall rather than the scaffold itself or you could tip it over when climbing up.

Drilling through scaffolding into wooden planks | Construction Pro Tips
Family Handyman

9 / 12

Working with wood planks

It's perfectly acceptable to work on wooden planks, but there are a few things you should know. Use at least 2x10 planks made from a sturdy wood like Douglas fir. Some softer pine boards won't hold up. Especially avoid boards with large knots.

Building a workbench on top of scaffolding | Construction Pro Tips
Family Handyman

10 / 12

Build a handy workbench

One way to organize your workspace is to create a workbench by installing planks at a higher level than the ones being walked on. A workbench adds a level of safety as well because you’ll be less likely to trip on supplies and tools.

Scaffold tubes with varying diameters | Construction Pro Tips
Family Handyman

11 / 12

Don't mix and match

Combining scaffold styles can result in an unstable and dangerous platform. Just because most scaffold frames are yellow doesn't mean they're the same. There are at least five different styles of scaffold, and many have no identifying marks. The same manufacturer often builds several different styles.

Diagram warning of electric shock | Construction Pro Tips
Construction Pro Tips

12 / 12

Stay clear of power lines

You don't have to touch a power line to get electrocuted. Electricity can arc from the line to conductive materials (like scaffolds). Keep a minimum distance of 10 ft. from all power lines.