Create a smooth surface for new tile
There’s no easy way on how to remove tile installed over concrete. Unlike tile on cement board or wood, there’s no underlayment or subfloor that can be pried up and thrown away. Removing tile from concrete requires knocking out the tiles and adhesive. Removing tile takes time and hard work. Even a small bathroom will take half a day, at a minimum.
Use a 3/4- or 1-in. masonry chisel and a 2-lb. hand maul. Start at a broken tile or between tiles where the grout has loosened. Work the chisel under the tiles, forcing them loose. Strike the face of stubborn tiles to break them up for easier removal. Wear safety glasses, gloves, pants and a long-sleeve shirt, since hammering the tile sends sharp shards flying. Also wear a dust mask.
Typically, older floors with mastic adhesive will come up easier than floors laid with thinset mortar. Rent a small jackhammer with a chisel point if the tile refuses to come loose. For larger rooms, consider renting an electric tile stripper.
After you remove the tiles, chisel and scrape the adhesive off the concrete as well. If you can’t get it all, don’t worry. You can leave bits of adhesive up to 1/8 in. thick. Then use the flat side of a 12-in. trowel to apply a 1/8-in. layer of latex thin-set mortar over the floor. This is to fill in voids and level around remaining bits of adhesive. If you’re installing new tile, use the same latex thin-set to set the tile. Thin-set holds ceramic tiles better than mastic and is easier to work with.
Keep in mind that the easiest solution of all is to leave the old tile in place and install new tile directly over the old. The new floor will be slightly higher, so you’ll have to trim the door and extend the toilet ring.
Check out these other fantastic demo tips.
Disclosure: This post is brought to you by The Construction Pro Tips editors, who aim to highlight products and services you might find interesting. If you buy them, we get a small share of the revenue from the sale from our commerce partners. We frequently receive products free of charge from manufacturers to test. This does not drive our decision as to whether or not a product is featured or recommended. We welcome your feedback.